CI03 adjustable infrared camera
CI03 camera installation positions

· Application: Monitor the entire cabin or the backseat area
· Compatibility: JC261, JC400, and JC450 series
· FoV: 119° (H), 70° (V), 152° (D)
· Resolution: 1280*720
· Color: Full color in daytime and monochrome in dim light
· Night Vision: IR-940*2
· Operating Voltage: DC 3.6–5.5V
· Dimensions: 73*42mm
· Cable Length: 2.5m (5m or 10m extension cables are available for purchasing separately)
· Recommended Install Position: A pillar
· Other Possible Install Positions: On windshield
· Fixation: Fix with screws or double-sided adhesive tape

CI01 infrared cabin camera
CI01

Infrared Cabin-View Camera

CI02 USB cabin camera
CI02

Cabin-View USB Camera

CI03 adjustable infrared camera
CI03

An Upgrade of JC400 with AI

CI03 in Qatar

The CI03 is a small infrared camera with an adjustable viewing angle, which makes it the flexible member of the family. It can be mounted in various positions inside a vehicle and aimed precisely at the area that matters.

Where it is used

The whole cabin, the back seat area, or a specific zone such as a doorway or a till point in a service vehicle. Its adjustability is the reason installers reach for it when a fixed camera cannot quite see what is needed.

Compatibility

Works with the JC261, JC400 and JC450 series.

Installation in Qatar

Mounted, aimed on the live view and tested in darkness by our technicians. We prefer to aim it with someone sitting in the position being monitored, which takes two minutes and prevents a return visit.

Questions we are asked

How wide is the view?

119 degrees horizontally, 70 vertically, with a 152 degree diagonal, which covers a cabin comfortably from a corner position.

Can it be moved later?

Yes, and reaiming is straightforward if the vehicle’s use changes.

Is it visible to passengers?

It is small. We can mount it discreetly or prominently depending on whether deterrence is part of the purpose.

Specifications at a glance

  • Resolution: 1280 x 720
  • Field of view: 119 degrees horizontal, 70 vertical, 152 diagonal
  • Adjustable viewing angle
  • Night vision: dual IR-940 illuminators
  • Operating voltage: DC 3.6 to 5.5 V
  • Application: whole cabin or a specific area such as the back seat

When the adjustable angle matters

Minibuses, crew vehicles and service vans rarely allow a camera to be mounted exactly where the view would be ideal. An adjustable head lets the installer mount where there is structure and still aim where the view is needed. It is the camera we reach for when a fixed unit would end up looking at a pillar.

Support in Qatar

Mounted, aimed with someone seated in the monitored position, and tested at night by our technicians. Warranty and support from Doha.

Ordering and lead time

Tell us the vehicle type and what the camera must cover, and we will confirm the mounting position and quote with installation. For minibuses and crew vehicles we usually recommend seeing the vehicle first, because the right position is rarely obvious from a photograph. Call 6624 0400 or email info@pixelsqa.com.

Also consider

For a fixed cabin view on a JC450, the CI02 is quicker to fit. For an external view, see the CE01.

Fitted correctly, or not at all

The adjustable head is useful only if someone takes the time to use it. Our technicians aim the camera with a person seated in the monitored position, check the frame, and confirm the infrared view in darkness before the vehicle is released. Re-aiming after a seat change or a vehicle reassignment is part of our support rather than a chargeable visit.

LOCATION

Doha, Al Mirqab Mall Block B, 2nd floor, office 205

WORKING HOURS

Sat – Thu: 8:00 AM – 5:00 PM

Friday: Closed

CONTACT

Sat – Thu: 8:00 AM – 5:00 PM

Friday: Closed