· Application: Monitor the cargo in trailer, the rear, or the fuel tank
· Compatibility: JC261, JC400, and JC450 series
· FoV: 125° (H), 75° (V), 165° (D)
· Resolution: 1280*720
· Color: Full color
· Operating Voltage: DC 3.6–5.5V
· Dimensions: 22*22*30mm
· Cable Length: 0.5m (5m or 10m extension cables are available for purchasing separately)
· Recommended Install Position: Rear bumper
· Other Possible Install Positions: Front bumper, near fuel tank, or inside cargo trailer
·Fixation: Fix with screws or double-sided adhesive tape
CI01
Infrared Cabin-View Camera
CI02
Cabin-View USB Camera
CI03
An Upgrade of JC400 with AI
CE01 in Qatar
The CE01 is an IP67-rated camera with a small form factor, made for mounting outside the cabin. That rating matters in Qatar, where a camera on the back of a trailer faces dust, heat and the occasional downpour.
Where it is used
Monitoring cargo in a trailer, the rear of a vehicle, or the fuel tank area, which is a common requirement for fleets managing fuel losses.
Compatibility
Works with the JC261, JC400 and JC450 series, with a 125 degree horizontal field of view and full-colour output.
Installation in Qatar
Mounted with the cable entry sealed and routed away from moving parts, aimed on the live view, and tested with the vehicle loaded where cargo is the subject. Our technicians install across Qatar, with warranty and local support.
Questions we are asked
Will it survive a wash bay?
It is IP67 rated, which covers normal washing when installed and sealed correctly.
Can it be used on a trailer that is swapped between units?
Yes, with the appropriate connector arrangement. Tell us how the trailers are used and we will design the connection.
How does it differ from the CE02?
The CE02 is more ruggedly built for harsher exposure and side mounting. The CE01 is the compact general-purpose external camera.
Specifications at a glance
- Resolution: 1280 x 720
- Field of view: 125 degrees horizontal, 75 vertical, 165 diagonal
- Protection: IP67 rated for external mounting
- Colour: full colour
- Operating voltage: DC 3.6 to 5.5 V
- Application: trailer cargo, rear view or fuel tank area
The fuel tank use case
Fuel losses are one of the most common unexplained costs in a Qatari fleet, and they are difficult to prove without a view of the tank. A CE01 aimed at the filler, combined with location data from the tracker, turns an argument into a record of where the vehicle was and what happened at the tank.
Support in Qatar
Installed with sealed cable entry, routed away from moving parts, aimed on the live view and tested loaded where cargo is the subject. Warranty and local support.
Ordering and lead time
Tell us the vehicle or trailer type and which view you need, and we will quote the camera with the cable run and installation. Trailer applications need a short conversation about connectors if the trailer is swapped between units, and we would rather have that conversation before fitting than after. Call 4421 2322 or email info@pixelsqa.com.
Also consider
For harsher side-mounted exposure and blind-spot coverage, the CE02 is the tougher option.
Fitted correctly, or not at all
External cameras fail for two reasons: water entering an unsealed cable gland, and a lens aimed at the wrong part of the load bed. We seal every entry downward, route the cable away from hinges and moving parts, and aim the camera with the vehicle loaded where cargo is the subject of the view.